Not Authorized
You are currently not authorized to access this section.
Please contact your Administrator to change your authorization settings.
Please contact your Administrator to change your authorization settings.
Electrical Engineer - I&C
Syracuse, NY
Job Description
Location: Syracuse
Hybrid: 2 days a week, in the office Tuesday through Thursday, field visits will be required; if sites are far away, expenses will be covered.
PE license is preferred but not required.
Job Purpose
Responsible for the engineering, design, and technical oversight during construction of projects relating to gas regulating stations and the associated telemetering, control, and instrumentation systems.
Key Accountabilities:
* Perform instrumentation and controls engineering and design for natural gas construction projects which may include regulating facilities, large metering, natural gas heaters, remote operated equipment, and gate stations.
* Develop and implement programmable logic controller (PLC) control schemes for flow switching, metering, remote loading, flow control, pressure control, and burner control.
* Assist Instrumentation & Regulation (I&R) field crews in troubleshooting and commissioning equipment such as remote terminal units, water bath heaters, dryline heaters, hydronic heat systems, and gas analyzers.
* Develop and verify Pipe and Instrument Diagram (P&ID) drawings for regulator stations and burner systems.
* Develop and verify Control Diagram drawings for regulator stations.
* Collaborate with Gas System Operator (GSO) and Critical Network Infrastructure (CNI) to develop the necessary telemetry system for regulating stations using control room management techniques.
* Incorporate applicable Standards, Procedures and State/Federal statutory requirements into Gas system designs.
* Interpret and incorporate corporate process safety procedures.
* Identify and specify materials to be used in association with gas construction projects.
* Compile and review as built documentation for accuracy and incorporation into mapping and document management systems.
* Participate and/or lead inter-regional projects activities. This may require travel outside of assigned service territories.
Knowledge & Experience Requirements:
* Bachelor of Science Degree in an Engineering discipline is required.
* Master of Science Degree in Electrical Engineering is preferred.
* At least 5 years of I&C engineering design is required.
* Experience in the application of design and construction standards, engineering drawings, and procedures.
* Experience in the application of instrumentation and control systems for natural gas applications.
* Technical knowledge of natural gas system design and operations including natural gas industry codes and regulations, engineering and environmental codes and standards.
* Knowledge of OSHA, PHMSA, and applicable State regulations.
* Ability to prioritize work and manage multiple projects within budget and time constraints
* Demonstration of a high level of personal initiative and ability to interact with a diverse group of company personnel, contractors, regulatory representatives, and town/city officials in a positive collaborative manner.
* Excellent interpersonal and written communication skills including the ability to communicate effectively both internally and externally to the organization.
* Must have a valid driver's license.
Capabilities:
* Promotes team effectiveness by soliciting input from team members,
* Actively builds and maintains a network of relationships across functions, with peers in other organizations within the industry and with the regulators and utilizes these contacts to keep abreast of best practice and build mutual trust.
* Develop project bid specifications and assist in the procurement of engineering and/or and construction services.
* Manage external engineering design firms, contracted to support projects, to ensure all work is performed in accordance with company standards, within budget and on schedule.
* Perform design quality peer reviews.
* Establish and lead, as necessary, an engineering design project team to develop and manage all engineering aspects of a project, up to and including project closeout and compilation of as-built documentation.
* Effectively communicate project information with involved internal and external stake holders.
* Implement change control procedures as necessary to track design changes initiated by engineering or field operations and identify any associated risks that may result. Document any requests to deviate from approved/agreed to parameters and seek authorization where required.
#ZR
We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religion, color sex, national origin, citizenship status, age, sexual orientation, gender identity, marital status, uniform service member status, genetic information, disability, or any other protected status, in accordance with all applicable federal, state, and local laws. This practice extends to all aspects of our employment practices, including but not limited to, recruiting, hiring, firing, promoting, transferring, compensation, benefits, training, leaves of absence, and other terms and conditions of employment.
Hybrid: 2 days a week, in the office Tuesday through Thursday, field visits will be required; if sites are far away, expenses will be covered.
PE license is preferred but not required.
Job Purpose
Responsible for the engineering, design, and technical oversight during construction of projects relating to gas regulating stations and the associated telemetering, control, and instrumentation systems.
Key Accountabilities:
* Perform instrumentation and controls engineering and design for natural gas construction projects which may include regulating facilities, large metering, natural gas heaters, remote operated equipment, and gate stations.
* Develop and implement programmable logic controller (PLC) control schemes for flow switching, metering, remote loading, flow control, pressure control, and burner control.
* Assist Instrumentation & Regulation (I&R) field crews in troubleshooting and commissioning equipment such as remote terminal units, water bath heaters, dryline heaters, hydronic heat systems, and gas analyzers.
* Develop and verify Pipe and Instrument Diagram (P&ID) drawings for regulator stations and burner systems.
* Develop and verify Control Diagram drawings for regulator stations.
* Collaborate with Gas System Operator (GSO) and Critical Network Infrastructure (CNI) to develop the necessary telemetry system for regulating stations using control room management techniques.
* Incorporate applicable Standards, Procedures and State/Federal statutory requirements into Gas system designs.
* Interpret and incorporate corporate process safety procedures.
* Identify and specify materials to be used in association with gas construction projects.
* Compile and review as built documentation for accuracy and incorporation into mapping and document management systems.
* Participate and/or lead inter-regional projects activities. This may require travel outside of assigned service territories.
Knowledge & Experience Requirements:
* Bachelor of Science Degree in an Engineering discipline is required.
* Master of Science Degree in Electrical Engineering is preferred.
* At least 5 years of I&C engineering design is required.
* Experience in the application of design and construction standards, engineering drawings, and procedures.
* Experience in the application of instrumentation and control systems for natural gas applications.
* Technical knowledge of natural gas system design and operations including natural gas industry codes and regulations, engineering and environmental codes and standards.
* Knowledge of OSHA, PHMSA, and applicable State regulations.
* Ability to prioritize work and manage multiple projects within budget and time constraints
* Demonstration of a high level of personal initiative and ability to interact with a diverse group of company personnel, contractors, regulatory representatives, and town/city officials in a positive collaborative manner.
* Excellent interpersonal and written communication skills including the ability to communicate effectively both internally and externally to the organization.
* Must have a valid driver's license.
Capabilities:
* Promotes team effectiveness by soliciting input from team members,
* Actively builds and maintains a network of relationships across functions, with peers in other organizations within the industry and with the regulators and utilizes these contacts to keep abreast of best practice and build mutual trust.
* Develop project bid specifications and assist in the procurement of engineering and/or and construction services.
* Manage external engineering design firms, contracted to support projects, to ensure all work is performed in accordance with company standards, within budget and on schedule.
* Perform design quality peer reviews.
* Establish and lead, as necessary, an engineering design project team to develop and manage all engineering aspects of a project, up to and including project closeout and compilation of as-built documentation.
* Effectively communicate project information with involved internal and external stake holders.
* Implement change control procedures as necessary to track design changes initiated by engineering or field operations and identify any associated risks that may result. Document any requests to deviate from approved/agreed to parameters and seek authorization where required.
#ZR
We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religion, color sex, national origin, citizenship status, age, sexual orientation, gender identity, marital status, uniform service member status, genetic information, disability, or any other protected status, in accordance with all applicable federal, state, and local laws. This practice extends to all aspects of our employment practices, including but not limited to, recruiting, hiring, firing, promoting, transferring, compensation, benefits, training, leaves of absence, and other terms and conditions of employment.
Job Summary
Start Date
As soon as possible
Employment Term and Type
Regular, Full Time
Required Education
Bachelor's Degree
Required Experience
5+ years
Email this Job to Yourself or a Friend